澳门太阳集团-首页

网站公告:
欢迎访问上海澳门太阳集团!
全国服务热线:021-51095632
资讯中心
微型有机溶剂喷雾干燥机,循环喷雾干燥机设备厂家
添加时间:2022/5/30 8:54:00

  Instructions for Use

  1. Finish the the installation of dryer (generally no need to install), oxygen meter, and chiller. And after the connecting the air outlet of the nitrogen bottle to the left air inlet of the dryer.

  2. Provide power supply for the dryer, oxygen meter, and chiller respectively. Then, switch on them respectively.

  3. First turn on the cooling button of the chiller,Set the temperature, usually about 5 degrees; then click cycle.

  4. After the temperature of the chiller drops to the set value, then open the nitrogen bottle (nitrogen generator), and adjusting pressure at 0.15-0.2MPa.

  5. Switch on the fan on the machine display, and adjust the fan frequency through the knob, the general frequency is set to about 35. The parameters be set according to the conditions of the material. And observe the oxygen content of the oxygen meter.

  6. Setting the temperature when the oxygen content below 3%, then click the heating switch.

  7. Set the feeding speed after the heating temperature rises to the set value, and then click on the peristaltic pump button.

  Power on,Enter the system, the displays shown as below循环喷雾干燥机设备厂家


澳门太阳集团|太阳集团

XML 地图 | Sitemap 地图